Industrial Automation using with Programmable Switching Control

Authors(5) :-Sahil Saini, Neha Bharti, Sunikshita Katoch, Gagandeep Singh, Harpreet Kaur Channi

In this paper, we have illustrated how to switch industrial loads using a user programmable logic control device for sequential operation. This operation is generally used for repetitive nature of work. Programmable logic controllers used in industrial applications are very expensive for simple operations like sequential switching of loads. In this project, we demonstrate the working of this simple operation using a microcontroller of 8052 family. The development of this application requires configuration of the program through input switches. In industries, there are many tasks are carried out which requires some repeated operation in various orders and time intervals. For example, certain loads need to be switched ON/OFF in specific time intervals. To achieve this, microcontroller is programmed in such a way that the loads a can be operated in three modes: Set mode, Auto mode and Manual mod. In set mode, through timers, the machinery works based on input time set by the user where as in auto mode it works on default time settings and finally in the manual mode it functions while respective switches are pressed depending on the user’s need and flexibility. All the modes and status of loads are displayed on an LCD. Thus, tasks performed by costly PLCs can now be achieved using a microcontroller making the device cost effective by adding C language to this project. Further the project can be enhanced by interfacing it with a GSM modem where by sending an SMS to the control system we can select the mode and timing remotely.

Authors and Affiliations

Sahil Saini
Electrical Engineering Department, University Institute of Engineering Chandigarh University, Gharuan, Mohali Punjab, India
Neha Bharti
Electrical Engineering Department, University Institute of Engineering Chandigarh University, Gharuan, Mohali Punjab, India
Sunikshita Katoch
Electrical Engineering Department, University Institute of Engineering Chandigarh University, Gharuan, Mohali Punjab, India
Gagandeep Singh
Electrical Engineering Department, University Institute of Engineering Chandigarh University, Gharuan, Mohali Punjab, India
Harpreet Kaur Channi
Assistant Professor Department of Electrical Engineering, University Institute of Engineering Chandigarh University, Gharuan, Mohali Punjab, India

Industrial Automation using with Programmable Switching Control

  1. Prof. Jaikaran Singh, Prof. Mukesh Tiwari, Mr. Manish Shrivastava, "Industrial automation – A Review" International Journal of Engineering Trends and Technology (IJETT) – Volume 4 Issue 8- August 2013, Pg no. 3516-3520 ISSN: 2231-5381 http://ijettjournal.org)
  2. Aishverya Kumar Sharma, Kushagra Kumar Choubey, Mousam Sharma. "INDUSTRIAL AUTOMATION USING 8051 MICROCONTROLLER" , Pg No 361-364 (www.ijirst.org)
  3. Ojaswini Vijay Duragkar, Prof.P. V. Gawande. "Design And Implementation Of Industrial Automation System By Using Internet Of Things (Iot)" Volume: 03 Issue: 05 | May-2016 Pg No. 2184-2188(www.irjet.net)
  4. Bhosale Kiran Uttam1, Galande Abhijeet Baspusaheb, Jadhav PappuShivaji, Prof.Pisal.R.S  "Industrial Automation using IoT" Volume: 04 Issue: 06 | June-2017 Pg No. 205-208 (www.irjet.net)
  5. Mohd Sayeed, Syed Sayeed Ahmed, Farhan Malik Shaik, Owais Ahmed, Mohammed Abdul Rahman Uzair "Programmable Switching Control For Industrial Automation In Repetitive Works" , Pg No. 218-225 (http://www.arresearchpublication.com)
  6. http://data.conferenceworld.in
  7. www.arresearchpublication.com
  8. http://www. technicaljournalsonline.com
  9. www.wikipedia.org
  10. http://nevonprojects.com

Publication Details

Published in : Volume 2 | Issue 5 | September-October 2017
Date of Publication : 2017-10-31
License:  This work is licensed under a Creative Commons Attribution 4.0 International License.
Page(s) : 309-313
Manuscript Number : CSEIT117255
Publisher : Technoscience Academy

ISSN : 2456-3307

Cite This Article :

Sahil Saini, Neha Bharti, Sunikshita Katoch, Gagandeep Singh, Harpreet Kaur Channi, "Industrial Automation using with Programmable Switching Control", International Journal of Scientific Research in Computer Science, Engineering and Information Technology (IJSRCSEIT), ISSN : 2456-3307, Volume 2, Issue 5, pp.309-313, September-October-2017. |          | BibTeX | RIS | CSV

Article Preview