To Design an Electroluminescent (E-L) Cell Using Phosphor Material

Authors

  • Jitendra Kumar Ekka  M.Tech Scholar, ET & T Department Bhilai Institute of Technology, Durg, Chhattisgarh, India
  • Prof. Ravindra Manohar Potdar  Associate Professor, ET & T Department Bhilai Institute of Technology, Durg, Chhattisgarh, India
  • Dr. Raunak Kumar Tamrakar  Associate Professor, ET & T Department Bhilai Institute of Technology, Durg, Chhattisgarh, India

Keywords:

White WLEDs Light Emitting Diodes (WLEDs), EL(Electroluminescence), CNT(Carbon Nanotube), AC EL(Alternating Current driven Electroluminescence).

Abstract

The development of production of light through a cloth once it's placed to force field is termed Electroluminescence (EL). beneath the presence of high force field that involves the injection of charge carriers the electrical energy EL is created. This consequently produces radiative negatron hole recombination for the assembly of EL within the material thought of. The technique of EL device style is important and therefore the style has to have the fundamental information. For this purpose numerous analysis papers has been studied and necessary info has been collected and area unit conferred in this paper. This paper presents the techniques and ways adopted by numerous researchers to style the EL device.

References

  1. D. Haranath, Savvi Mishra, Amish G. Joshi, Sonal Sahai, Virendra Shanker,“Effective Doping of Rare-earth Ions in Silica Gel: A Novel Approach to Design Active Electronic Devices”, National Physical Laboratory, Council of Scientific and Industrial Research, 2011, p141-145.
  2. D Haranath, Sonal Sahai, Savvi Mishra, M Husain and Virendra Shanker, “Fabrication And Electro-Optic Properties Of A MWCN  Driven Novel Electroluminescent Lamp”, Centre for Nanoscience and Nanotechnology, Jamia Millia Islamia, New Delhi, 2012, pp1-7.
  3. Savvi Mishra, R. Rajeswari, N. Vijayan, V. Shanker, M.

K. Dalai, C. K. Jayasankar, S. Surendra Babu and D. Haranath, “Probing the structure, morphology and multifold blue absorption of a new red-emitting nanophosphor for LEDs”, Journal of Materials  Chemistry, 2013, pp 5849–5855.

  1. Deepika Yadav, Savvi Mishra, Virendra Shanker, D.Haranath, “Design And Development Of Low-Power Driven Hybrid Electroluminescent Lamp From Carbon Nanotube Embedded Phosphor Material”, Journal of Alloys and Compounds, 2013, pp 632–635.
  2. Deepika Yadav, Dileep Dwivedi,  Savvi Mishra,  B. Sivaiah, A. Dhar, Virendra Shanker, and D. Haranath, “Investigation of Local Field Enhancement and Hot Electron Injection in Carbon Nano-Tube DopedPhosphorNano CompositeforUltra-Bright Electroluminescence”, Science of  Advanced  Materials Vol. 6, 2014, pp. 1–6.
  3. X.Yan,Q. Shihong, “Principle and applicationofinorganic electroluminescence and organic electroluminescence”, International  Conference  on Electric Information and Control Engineering (ICEICE), 2011, pp. 6027– 6029.
  4. R.T. Kenneth, “Method  for  increasing  brightness andhalflifeof electroluminescent phosphors”, US patent 5,110,499.
  5. B.D.Kenton,“Encapsulated electroluminescent phosphor and method for making same”, US patent 1997, 5,593,782.
  6. T.Satoh,T.Nakatsuta,K.Tsuruya,Y.Tabata,T.Tamura,Y.Ichikawa,and H.Tango,J.Mater.Sci.Mater. Electron.18, (2007).
  7. N.Miura,Proceeding of14th International Workshop on Inorganic and Organic Electroluminescence,Tivoli, Rome, Italy (2008),Vol. 427.
  8. M. Warkentin, F. Bridges, S. A. Carter, and M. Anderson,Phy.Rev. B75, 075301(2007).
  9. L.Weishi and R.Jingxuan,Modern Display11, 53(1997).
  10. Z. Wang,Y. Chen, P.Li, X. Hao, J. Liu, R.Huang, and Y. Li,ACS Nano5, 7149(2011).
  11.  C.Schrage and S.Kaskel,ACS Appl. Mater. Interfaces8, 1640(2009).
  12. J.M.Kim,J.-Y.Kim, J. B. Yoo, and S.G. Yu, Appl. Phys. Lett. 95, 071901(2009).
  13.  J.-Y.Kim, S.H. Park, T. Jeong, M. J. Bae, Y. C. Kim, I. Han, and S. Yu,J. Mater. Chem.22, 20158(2012).
  14. J.-Y.Kim,M.J.Bae,S.H.Park,T. Jeong,S.Song,J. Lee, I. Han,J.B.Yoo, D. Jung, and S. Yu,Carbon50, 170(2012)

Downloads

Published

2017-10-31

Issue

Section

Research Articles

How to Cite

[1]
Jitendra Kumar Ekka, Prof. Ravindra Manohar Potdar, Dr. Raunak Kumar Tamrakar, " To Design an Electroluminescent (E-L) Cell Using Phosphor Material, IInternational Journal of Scientific Research in Computer Science, Engineering and Information Technology(IJSRCSEIT), ISSN : 2456-3307, Volume 2, Issue 5, pp.848-852, September-October-2017.