Designing and Modeling of Water Level Indicator

Authors(5) :-Abhishek Saini, Shikhar Rana, Simranjeet Singh, Mohit, Harpreet Kaur Channi

The aim of developing this project is towards providing efficient and simple method for Water level Indicator. The drinking water crisis in Asia is reaching alarming proportions. It might very soon attain the nature of global crisis. Hence, it is of utmost importance to preserve water for human beings. In many houses there is unnecessary wastage of water due to overflow in overhead tanks. Automatic Water Level Indicator and Controller can provide a solution to this problem. The operation of water level controller works upon the fact that water conducts electricity due to the presence of minerals within it. So water can be used to open or close a circuit. As the water level rises or falls, different circuits in the controller send different signals. These signals are used to switch ON or switch OFF the motor pump as per our requirements. . The main components used in this equipment are PIC microcontroller, sensor and motor. By using this project we will be able to control wastage of water automatically and capable of managing water levels in different systems like water tanks, boilers and swimming pools, etc.

Authors and Affiliations

Abhishek Saini
Electrical Engineering Department, University Institute of Engineering, Chandigarh University, Gharuan, Mohali, Punjab, India
Shikhar Rana
Electrical Engineering Department, University Institute of Engineering, Chandigarh University, Gharuan, Mohali, Punjab, India
Simranjeet Singh
Electrical Engineering Department, University Institute of Engineering, Chandigarh University, Gharuan, Mohali, Punjab, India
Mohit
Electrical Engineering Department, University Institute of Engineering, Chandigarh University, Gharuan, Mohali, Punjab, India
Harpreet Kaur Channi
Assistant Professor, Electrical Engineering Department, University Institute of Engineering, Chandigarh University, Gharuan, Mohali, Punjab, India

Water Crises, Automatic, Water Level Indicator, PIC Microprocessor , Sensor, Motor.

  1. Pandey et.al(2004),Agricultural Economicist, Research Review Vol. 24 January-June 2011 pp 109-118
  2. Muhd Asran Bin Abdullah(2008),water level in tank using sensor and PID controller,btech.Thesis,University Malasia Saraswak,Saraswak,123p
  3. PIC Microcontroller Instruction Sets, PIC16F877A Datasheet
  4. P. Dietz, W. Yerazunis, D. Leigh, Very Low-Cost Sensing and Communication Using Bidirectional LEDs, UbiComp 2003: Proceedings, vol. 2864, pp. 175-191, 2003.
  5. Shandong Jianzhu "Design of intrinsically safe intelligent water-level monitor used in coal mine ", IEEE Trans. on Industrial Applications, vol. 19, pp.1052 -1056 1983
  6. Chung.P, Leo.N: Transient Performance Based Design Optimization of PM Brushless DC motor Drive Speed Controller, Proceeding of the IEEE International Conference on Electrical System, Singapore, pp-881-886, June, 2005.
  7. www.researchgate.net/publication/29654388

Publication Details

Published in : Volume 2 | Issue 6 | November-December 2017
Date of Publication : 2017-12-31
License:  This work is licensed under a Creative Commons Attribution 4.0 International License.
Page(s) : 374-377
Manuscript Number : CSEIT1726121
Publisher : Technoscience Academy

ISSN : 2456-3307

Cite This Article :

Abhishek Saini, Shikhar Rana, Simranjeet Singh, Mohit, Harpreet Kaur Channi, "Designing and Modeling of Water Level Indicator", International Journal of Scientific Research in Computer Science, Engineering and Information Technology (IJSRCSEIT), ISSN : 2456-3307, Volume 2, Issue 6, pp.374-377, November-December-2017. |          | BibTeX | RIS | CSV

Article Preview