Electronics System Design of Preventive Operation for Industrial Need
Keywords:
Intelligent System, Pradective Maintenance, Neuro- Fuzzy System, Vibration Monitoring,Abstract
In the power generation industry, any failures may lead to blackouts which can have very severe impact on many (or actually most) aspects of our life and can cripple many services, which are crucial to our well-being. Therefore, minimizing outages and preventing plant equipment failures is becoming a critical issue for power plant operators. While condition monitoring of The most critical machines as turbines, compressors, like ID fans, FD fans ,PA fans, BFP, CWP, CEP, Mill Motors , boiler feed pumps and other big machinery, seem to be receiving the same level of attention from engineers. Failure of these machines may have catastrophic impact on the power plant operation, therefore it was decided to investigate a possibility of developing a system, which would trigger a warning in case of suspicious machine behavior. The aim of the research work was to analyze data in order to develop an alarm system which signals a warning in case of abnormal state of operation and, consequently, can be used to improve the maintenance regime through investigate condition monitoring,Data analysis ,System
References
- Chen, P., Toyota, T. and He, Z. (2001). Automated function generation of symptom parameters and application to fault diagnosis of machinery under variable operating conditions. IEEE Transactions on Systems, Man, and Cybernetics, 31, 775 – 781
- Chien, C. F., Chen, S. L. and Lin, Y. S. (2002). Using Bayesian network for fault location on distribution feeder. IEEE Transactions on Power Delivery, 17, 785 – 793
- Devaney, M. and Cheetham, B. (2005). Case-Based Reasoning for Gas Turbine Diagnostics. In 18th International FLAIRS Conference
- N.TandonandA.Parey.(ref1),“Condition MonitoringofRotaryMachines”,ConditionMonitoringand Control forIntelligent Manufacturing Springer Seriesin Advanced Manufacturing,pp109-136,2006.
- GDiwakar, Dr.MRSS atyanarayana, P.RaviKumar ,“Detection of Gearfaultusing vibrationan alysis”, International Journal of Emerging Technology and Advanced Engineering, ISSN2250-2459, Volume2 ,Issue9, September2012.
- Schoen.R.R. Habetler, T.G.,Kamran, F.,Bartfield, R.G, "Motorbearing damagede tectionusing statorcur rentmonitoring ,"inIndustry Applications, IEEE Transactionson, vol.31,no.6,pp.1274-1279,Nov/Dec1995.
- Ilya Mokhovand Alexey Minin, “Advanced Forecastingand Classification Technique for Condition Monitoring of Rotating Machinery”, Intelligent Data Engineering and Automated Learning IDEA L2007 Lecture Notesin Computer Science Volume4881,pp37-46,2007.
- SurendraN.Ganeriwala(Suri)&ZhuangLi,MarkH.Richardson, “Using Operating Deflection Shapes to Detect Misalignmentin Rotating Equipment”, PresentedatIMACXXVI,February4-7,2008.
- Abhinay V.Dube, L.S.Dhamande, P.G.Kulkarni, “Vibration Based Condition Assessment of Rollingelement Bearings With Localized Defects”, International Journal of Scientific &Technology Research Volume2, Issue4, APRIL 2013.
- MilindNatu, “BearingFault Analysis Using Frequency Analysisand Wavelet Analysis”, International Journal of Innovation, Managementand Technology, Vol.4, No. 1, February2013.
- Pravesh Durkhure, Akhilesh Lodwal, “Fault Diagnosis of Ball BearingusingTime Domain Analysis and Fast Fourier Transformation”, International Journal of Engineering Sciences & ResearchTechnology,Vol.3(7)711-715July,2014.
Downloads
Published
Issue
Section
License
Copyright (c) IJSRCSEIT
This work is licensed under a Creative Commons Attribution 4.0 International License.