Solid Edge 3D Model of Synthesized Geared Slider Crank Mechanism with Variable Topology Features

Authors

  • H. M. Naveen  Assistant Professor, Department of Mechanical Engineering, RYM Engineering College, Ballari, Karnataka, India
  • Shrinivas S. Balli and Umesh M. Daivagna  Professor, Department of Mechanical Engineering, Basaveshwar Engineering College, Bagalkot, Karnataka, India

DOI:

https://doi.org//10.32628/CSEIT2173135

Keywords:

Synthesized Geared Slider Crank, Variable Topology Mechanism, Solid Edge Model

Abstract

The paper introduces solid edge 3D model of synthesized geared slider crank mechanism. The synthesized mechanism exhibits the features of variable topology mechanism. This mechanism is modeled in solid edge software and presented. The gear connected to the crank provides the possibility of using it as an input and as well as output to the mechanism. The mechanism showcases the single input to multiple output variable topology features.

References

  1. Shrinivas S. Balli and Satish Chand, “Synthesis of a five-bar mechanism with variable topology for motion between extreme positions (SYNFBVTM),” Mechanism and Machine Theory, vol. 36, no.10, pp. 1147–1156, 2001.
  2. Shrinivas S. Balli and Satish Chand, “Five-bar motion and path generators with variable topology for motion between extreme positions,” Mechanism and Machine Theory, vol. 37, no. 11, pp. 1435–1445, 2002.
  3. Shrinivas S. Balli and Satish Chand, “Synthesis of a planar seven-link mechanism with variable topology for motion between two dead-center positions,” Mechanism and Machine Theory, vol.38, no. 11, pp. 1271–1287, 2003.
  4. G. M. Gadad, Umesh M. Daivagna and Shrinivas S. Balli, “Triad and dyad synthesis of planar seven-link mechanisms with variable topology”, National Conference on Machines and Mechanisms (NaCoMM ’05), pp. 67–73, 2005.
  5. Umesh M. Daivagna and Shrinivas S. Balli, “FSP Synthesis of an off-set five bar-slider mechanism with variable topology”, National Conference on Machines and Mechanisms (NaCoMM ’07), pp. 345–350, 2007.
  6. Ren-Chung Soong, Kuei-Shu Hsu and Feng-Tsai Weng, “A Programmable Geared Seven-bar Mechanism for Mechanical Forming Presses”, Journal of the Chinese Society of Mechanical Engineers, Vol.29, No.1, pp.61-67, 2008.
  7. Umesh M. Daivagna and Shrinivas S. Balli, “Synthesis of a Seven-Bar Slider Mechanism with Variable Topology for Motion between Two Dead-Center Positions”, World Congress on Engineering, Vol. II, pp. 1454-1459, 2010.
  8. Volken Parlaktas, Eres Soylemez and Engin Tanik, “On the synthesis of a geared four-bar mechanism”, Mechanism and Machine Theory, Vol.45, Issue 8, August 2010.
  9. Umesh M. Daivagna and Shrinivas S. Balli, “Synthesis of Five-Bar Slider Mechanism with Variable Topology for Finitely Separated Positions”, Advances in Mechanical Engineering, vol.2011, 2011.
  10. Prashant B. Tadalagi and Shrinivas S. Balli, “A Review on Mechanisms with Variable Topology (Revisiting the Variable Topology Mechanism)”, IOP Conf. Series: Materials Science and Engineering, Vol. 691, pp. 012047(1-9), 2019.
  11. H. M. Naveen, Shrinivas S. Balli and Umesh M. Daivagna, “Two FSP Synthesis of Eight Link Gear Mechanism for Motion Generation with 9R-1G Joints”, International Journal of Engineering Applied Science and Technology, Vol. 5, No. 3, pp. 288-294, 2020.
  12. H. M. Naveen, Shrinivas S. Balli and Umesh M. Daivagna, “Kinematic Synthesis of In-Line Ten Link Gear Slider Mechanism of Variable Topology with 12R-1G-1P Joints”, International Research Journal of Engineering and Technology, Vol. 7, No. 8, pp. 605-610, 2020.
  13. Prashant B. Tadalagi and Shrinivas S. Balli, “Limiting Positions Synthesis of Seven Bar Slider Automated Fiber Placement Mechanism for Motion Generation using Variable Topology”, International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), Vol. 10, Issue 3, pp. 13297–13308, 2020.
  14. H. M. Naveen, Shrinivas S. Balli and Umesh M. Daivagna, “Study of Characteristic Behavior of Synthesized Variable Topology Mechanism using Linkage Software”, GIS Science Journal, Vol. 7, No.8, pp. 160-166, 2020.
  15. H. M. Naveen, Shrinivas S. Balli and Umesh M. Daivagna, “Functional Aspects of Synthesized In-Line Ten Link Gear Slider Mechanism of Variable Topology using Linkage Software”, International Research Journal of Engineering and Technology, Vol. 7, No.9, pp. 3281-3286, 2020.
  16. H. M. Naveen, Shrinivas S. Balli and Umesh M. Daivagna, “Possible Configurations and Coupler Curves of Eight Link Gear Variable Topology Mechanism in Phase III Operating Condition”, International Research Journal of Engineering and Technology, Vol. 7, No. 11, pp. 502-509, 2020.
  17. H. M. Naveen, Shrinivas S. Balli and Umesh M. Daivagna, “Alternative Approaches in Variable Topology as Applied to Degree(s) of Freedom and Modes of Operation in Mechanisms”, International Journal of Advances in Engineering and Management, Vol. 2, No. 9, pp. 442-449, 2020.
  18. H. M. Naveen, Shrinivas S. Balli and Umesh M. Daivagna, “Transmission Angles in Synthesized Eight Link Gear Mechanism of Variable Topology with Characteristic Output”, International Journal of Engineering Sciences & Research Technology, Vol. 10, Issue 2, pp. 60-68, 2021.
  19. H. M. Naveen, Shrinivas S. Balli and Umesh M. Daivagna, “Solid Edge 3D Model of Synthesized Eight Link Gear Variable Topology Mechanism”, International Journal of Computer Techniques, Vol. 8,Issue 2, pp. 163-170, 2021.
  20. H. M. Naveen, Shrinivas S. Balli and Umesh M. Daivagna, “Solid Edge 3D Model of Synthesized In-Line Ten Link Gear Slider Variable Topology Mechanism”, International Research Journal of Engineering and Technology, Vol. 8,No. 4, pp. 3056-3061, 2021.
  21. Prashant B. Tadalagi and Shrinivas S. Balli, “Dead Centre Positions Synthesis off offset Seven Bar Slider Mechanism for Motion Generation using Variable Topology” , GIS Science Journal, Vol. 8, No.5, pp. 1613-1620, 2021.
  22. H. M. Naveen, Shrinivas S. Balli, Umesh M. Daivagna, " Kinematic Synthesis of 3R-1P Geared Slider Crank Mechanism with Variable Topology Features for Motion Generation”, International Journal of Scientific Research in Science, Engineering and Technology(IJSRSET), Volume 8, Issue 3, pp.317-322, May-June-2021.

IInternational Journal of Scientific Research in Computer Science, Engineering and Information Technology

Downloads

Published

2021-06-30

Issue

Volume 7, Issue 3, May-June-2021

Section

Research Articles

License

Copyright (c) IJSRCSEIT

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]
H. M. Naveen, Shrinivas S. Balli and Umesh M. Daivagna, " Solid Edge 3D Model of Synthesized Geared Slider Crank Mechanism with Variable Topology Features, IInternational Journal of Scientific Research in Computer Science, Engineering and Information Technology(IJSRCSEIT), ISSN : 2456-3307, Volume 7, Issue 3, pp.632-637, May-June-2021. Available at doi : https://doi.org/10.32628/CSEIT2173135