Multiobjective Optimization for Ceramic Hip Arthroplasty with Medical Physics Applications

Authors

  • Francisco Casesnoves  PhD Engineering, MSc Physics, MD. Independent Research Scientist. IAAM (International Association of Advanced Materials), Tallinn, Harjumaa, Estonia

DOI:

https://doi.org//10.32628/CSEIT21738

Keywords:

Software Engineering Methods, Multiobjective Nonlinear Optimization, Artificial Implants (AI), Hip Implants, Total Hip Arthroplasty (THA), CoC (Ceramic on Ceramic implant), Objective Function (OF), ZTA (Zirconium Taughtened Alumina), Prosthesis Materials, Wear, Biomechanical Forces.

Abstract

In a previous contribution a total hip arthroplasty optimization for metal materials was presented [5]. THA constitutes an important group among the most frequent used implants in Biomedical Engineering and Medical Devices research field. In this further multiobjective study, modelling and nonlinear optimization is performed with four commonly used ceramic materials for CoC hip arthroplasty—among the most surgically utilized currently. These are ZTA Biolox, ZTA Biolox-Delta, Alumina (Al3O2), and Zirconium (ZrO2). Numerical results for dual optimization show acceptable figures with low residuals. Results with algorithm of 2D Graphical Optimization and 3D Interior Multiobjective Optimization are proven, explained, shown acceptable. According to these optimal findings and calculations, the model parameters are mathematically demonstrated, and verified. Results of 2D graphics and 3D Interior Multiobjective Optimization to obtain the local minima are sharp. Optimization rising numbers match the model design because the hardness and experimentally-published erosion intervals of Alumina, Zirconia, ZTA Biolox and ZTA Biolox-Delta intervals overlap one another approximately. Medical-Mathematical Physics consequences emerge for new nonlinear multiobjective optimization algorithms. Based on these numerical multifunctional data results, applications in Biomedical Engineering devices and future Bioengineering/Biomaterials designs are guessed.

References

  1. Panjabi, M, White, A. Clinical Biomechanics of the Spine. Lippincott. 1980.
  2. Casesnoves, F. Software Programming with Lumbar Spine Cadaveric Specimens for Computational Biomedical Applications, International Journal of Scientific Research in Computer Science, Engineering and Information Technology (IJSRCSEIT), ISSN : 2456-3307, Volume 7 Issue 1, pp. 07-13, January-February 2021.
  3. Casesnoves, F. The Numerical Reuleaux Method, a computational and dynamical base with applications. First Part. Lambert Academic Publishing. ISBN-10 3659917478. 2019.
  4. Casesnoves, F. Die Numerische Reuleaux-Methode Rechnerische und Dynamische Grundlagen mit Anwendungen (Erster Teil). ISBN-13 : 978-620-0-89560-8, ISBN-10: 6200895600. Publishing House: Sciencia Scripts. 2019-20.
  5. Casesnoves, F. Nonlinear comparative optimization for biomaterials wear in artificial implants technology. Presented in Applied Chemistry and Materials Science RTU2018 Conference Proceedings. Talk, Proceedings, and DOI article. 2018.
  6. Casesnoves F, Antonov M, Kulu P. Mathematical models for erosion and corrosion in power plants. A review of applicable modelling optimization techniques. IEEE Xplore database and will be cross referred. Proceedings of RUTCON2016 Power Engineering Conference.2016Riga Technical University.
  7. Casesnoves, F. 2D computational-numerical hardness comparison between Fe-based hardfaces with WC-Co reinforcements for Integral-Differential modelling. Key Engineering Materials Journal. Trans Tech publications 2018. Vol 762, pp 330-338. DOI: 10.4028/www.scientific.net/KEM.762.330.ISSN: 1662-9795. 2018.
  8. Casesnoves F, Surzhenkov A. Inverse methods for computational simulations and optimization of erosion models in power plants. IEEE Proceedings of RUTCON2017 Power Engineering Conference.Riga Technical University. IEEExplore Publication in 5th December 2017. DOI:10.1109/RTUCON.2017.8125630. Electronic ISBN:978-1-5386-3846-0. USB ISBN: 978-1-5386-3844-6.Print on Demand (PoD) ISBN: 978-1-5386-3847-7.
  9. Kulu P, Casesnoves F, Simson T, Tarbe R. Prediction of abrasive impact wear of composite hardfacings. Solid State Phenomena, Proceedings of 26th International Baltic Conference on Materials Engineering. 2017. Solid State Phenomena Submitted: 2017-06-12. ISSN: 1662-9779, Vol. 267, pp 201-206. DOI:10.4028/www.scientific.net/SSP.267.201 2017 Trans Tech Publications, Switzerland Online: 2017-10-10.
  10. Surzhenkov A, Viljus M, Simson T, Tarbe R, Saarna M, Casesnoves F. Wear resistance and mechanisms of composite hardfacings atabrasive impact erosion wear. IOP Conf. Series: Journal of Physics: Conf. Series 843 (2017) 012060 doi :10.1088/1742-6596/843/1/012060.
  11. Casesnoves, F. 'Computational Simulations of Vertebral Body for Optimal Instrumentation Design'. ASME Journal of Medical Devices (Research Paper). Author: F Casesnoves .Journal of Medical Devices. June 2012. Volume 6. Issue 2/021014.11 pages.http://dx.doi.org/10.1115/1.4006670.
  12. Abramobitz, Stegun. Handbook of Mathematical Functions. Applied Mathematics Series. 55.1972.
  13. Luenberger, G D. Linear and Nonlinear Programming. Fourth Edition.Springer.2008.
  14. Casesnoves,F.'Large-Scale Matlab Optimization Toolbox (MOT) Computing Methods in Radiotherapy Inverse reatment Planning’. High Performance Computing Meeting. Nottingham University. January 2007.
  15. Casesnoves, F. ‘A Monte-Carlo Optimization method for the movement analysis of pseudo-rigid bodies’. 10th SIAM Conference in Geometric Design and Computing, Texas, San Antonio, USA. Contributed Talk. November 2007.
  16. 'European Textbook on Ethics in Research’. European Commission, Directorate-General for Research. Unit L3. Governance and Ethics. European Research Area. Science and Society. EUR 24452 EN.
  17. Galante, J, Rostoker, W. Wear in Total Hip Prostheses. Acta Orthopaedica Scandinavica. 43:sup145, 1-46, DOI: 10.3109/ort.1972.43.suppl-145.01.
  18. L. Mattei, F.DiPuccio, B.Piccigallo, E.Ciulli . Lubrication and wear modelling of artificial hip joints: A review. Tribology International 44 (2011) 532–549.
  19. Casesnoves, F.. 2016. Exact Integral Equation Determination with 3D Wedge Filter Convolution Factor Solution in Radiotherapy. Series of Computational-Programming 2D-3D Dosimetry Simulations. International Journal of Scientific Research in Science, Engineering and Technology (ijsrset.com). 2016 IJSRSET | Volume 2 | Issue 4 | Print ISSN: 2395-1990 | Online ISSN : 2394-4099 Themed Section: Engineering and Technology.
  20. Casesnoves, F. 1.-‘Theory and Primary Computational Simulations of the Numerical Reuleaux Method (NRM)´,Casesnoves, Francisco. Published in International-Scientific Peer-Reviewed Journal, International Journal of Mathematics and Computation. http://www.ceser.in/ceserp/index.php/ijmc/issue/view/119).Volume 13,Issue Number D11. 2011.
  21. Jennings, L and colls. Enhancing the safety and reliability of joint replacement implants. Orthopaedics and trauma 26:4. Elsevier. 2012.
  22. Casesnoves, F. Applied Inverse Methods for Optimal Geometrical-Mechanical Deformation of Lumbar artificial Disks/Implants with Numerical Reuleaux Method. 2D Comparative Simulations and Formulation. Computer Science Applications. Volume 2, Number 4, pp. 1-10. www.ethanpublishing.com. This article is registered as original method published by Francisco Casesnoves in Philadelphia 2015 in United States Congress Library.
  23. Casesnoves F. Mathematical Models and Optimization of Erosion and Corrosion. Taltech University Press. Doctoral Thesis. ISSN 25856898. 2018.
  24. Saifuddin, A., Blease, S., Macsweeney, E. Axial loaded MRI of the lumbar spine. Clinical Radiology (2003) 58: 661–671.
  25. Damm, P. Loading of total hip joint replacements. Doctoral Thesis. Technischen Universität Berlin. 2014.
  26. Barker, P., and Alter.The effect of applying tension to the lumbar fasciae on segmental flexion and extension. Proceedings of 5th International Congress of Low Back and Pelvic Pain. Pp. 50-52. 2004.
  27. Galme, S., Barker, P., Bhalerao, Y. Biomaterials in Hip Joint Replacement. International Journal of Materials Science and Engineering. Vol 4, 2, pp. 113-125. 2016.
  28. Casesnoves, F. Inverse methods and Integral-Differential model demonstration for optimal mechanical operation of power plants –numerical graphical optimization for second generation of tribology models. Electrical, Control and Communication Engineering. Riga Technical University. 2018, Vol 14, 1, pp. 39-50. (DOI: 10.2478/ecce-2018-0005).
  29. The European Code of Conduct for Research Integrity. Revised Edition. ALLEA. 2017.y. Revised Edition. ALLEA. 2017.
  30. Merola, M, Affatato, S. Materials for Hip Prostheses: A Review of Wear and Loading Considerations. Materials 2019, 12, 495; DOI:10.3390/ma12030495.
  31. Hutchings, I, Shipway, P. Tribology Friction and Wear of Engineering Materials. Second Edition. Elsevier 2017.

IInternational Journal of Scientific Research in Computer Science, Engineering and Information Technology

Downloads

Published

2021-06-30

Issue

Volume 7, Issue 3, May-June-2021

Section

Research Articles

License

Copyright (c) IJSRCSEIT

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]
Francisco Casesnoves, " Multiobjective Optimization for Ceramic Hip Arthroplasty with Medical Physics Applications, IInternational Journal of Scientific Research in Computer Science, Engineering and Information Technology(IJSRCSEIT), ISSN : 2456-3307, Volume 7, Issue 3, pp.582-598, May-June-2021. Available at doi : https://doi.org/10.32628/CSEIT21738