Experimental and Computational Analysis of Piston Coated with Aluminium Silicon Metal Matrix Composite Material

Authors

  • Poralla Venkatakrishna  PG. Scholar, Department of MECH, Mallareddy Engineering College, main campus, maisammaguda, Hyderabad, Telangana, India
  • Dumpa Suresh Reddy  Assistant Professor, Department of MECH, Mallareddy Engineering College, main campus, maisammaguda, Hyderabad Telangana, India
  • Prashanth A  Assistant Professor, Department of MECH, Mallareddy Engineering College, main campus, maisammaguda, Hyderabad Telangana, India

Keywords:

Piston, Catia, Ansys, Aluminium Silicon Metallic Matrix

Abstract

A piston is a component of mutual engines, mutual pumps, gas compressors and gas cylinders, amongst alternative similar mechanisms. it's the shifting factor that's contained by employing a cylinder and is formed fuel-tight by approach of piston jewelry Piston that transfer the combustible gases strength to the rod. to boost the potency of the engine there's a wish to possess a glance at concerning the piston. Pistons that square measure normally created up with alloy steels that show the grate resistant con to structural masses. among the mission we have a tendency to style a piston by the utilization of CatiaV5 layout computer code and that we did the structural load analysis by approach of constructing use of diverse substances in conjunction with composites on piston in Ansys worktable computer code. And achieved the chemical and mechanical looking for to ascertain the high-quality and performance of piston, and compare the outcomes of simulation analysis and looking for outcomes to make sure style is secure.

References

  1. R. Ravi Raja Malarvannan and P. Vignesh "Trial Investigation and Analysis of Piston by utilizing Composite Materials" Vol 04, Article-K100; November 2013.
  2. Mr. Rahul Dev Guptha, Dr. Vivek Jain and Er. Krishan Kanth Sharma "Trial Investigation and Analysis of wear parameters on Al/Sic/Gr Metal Matrix Hybrid composite by Taguchi Method" Volume 13 Issue 9 Version 1.0 Year 2013.
  3. Prakash Gadade and Arun L.R "Characterisation of aluminum-FlyashAlumina composite for cylinder examination by cae devices" Vol.2, Issue 12, December 2013.
  4. Ashwani Kumar, Shaik Imran Behmad, Pravin P Patil "Thermo-Mechanical and Vibration Analysis of the I.C. Motor Piston made of SiC strengthened ZrB2 composite utilizing Finite Element Method(ANSYS)" 2014.
  5. Er. Rachit Marwaha, Mr. Rahul Dev Gupta, Er. Krishan Kant Sharma "Assurance and Experimental Investigation Of Weight Loss On Al/Sic/Gr - Metal Matrix Hybrid Composite By Taguchi Method" Volume 2, Issue 11, November 2013.
  6. Etsion, I.: An Optimum Step Design for Centering of Pistons. J. Liquids Eng., Trans. ASME, ser. I, vol. 97, no. 4, Dec. 1975. pp. 621-624.
  7. A. Dolata-Grosz, M. Dyzia, J. Śleziona, J. Wieczorek "Composites Applied For Pistons," Volume 7 Issue 1/2007 37-40.
  8. S.M. Sapuan, M.S..D. Jacob, F. Mustapha and N. Ismail , "A model knowledgebased framework for material determination of earthenware network composites of car motor segments" Vol 23, 2002 page 701-708.
  9. J. I. Tune and K. S. Han, "Mechanical Properties and Solid Lubricant Wear Behavior of Al/Al2O3/C Hybrid Metal Matrix Composites Fabricated by Squeeze Casting Method" Journal of Composite Materials (1997) 31: 316.
  10. Mahanthesh G1, Umashankar 2 "Planning and Property Evaluation Of Aluminum Alloy (6061) Reinforcedwith Bottom Ash Particulate Composite (Albap Composite)" Volume 01, Issue 04.
  11. Mechanical properties of composite materials by Frank.W.Zok and Carlos G.Levi
  12. Abbott, G.L., Jenkins, R.J. also, Parker, W.J. "Streak strategy for deciding Thermal Diffusivity, Heat Capacity and Thermal Conductivity," Journal of Applied Physics, Vol. 31, Issue 9.
  13. Achutha Kini, Gowri Shankar, M.C., Jayashree, P.K., Raviraj Shetty and Sharma, S.S. 2013"Survey onEffect of Silicon Carbide on Stir Cast Aluminum Metal Matrix Composites," International Journal of CurrentEngineering and Technology, ISSN: 2277-4106, Vol. 3, Number.
  14. Anil Kumar, H.C., Hebbar, H.S. also, Ravishankar, K.S. 2011"Mechanical Properties of Fly Ash Reinforced Aluminum Matrix Alloy," International Journal of Mechanical and Materials Engineering, Vol. 6, 41-45.
  15. Antony raj Arockiaswamy, German, R.M., Wang, Suri and Park 2013"DSC examination of Al 6061 aluminum amalgam powder by fast hardening," Journal of Thermal Analysis and Calorimetry, 361-366.
  16. Ashish Srivastava, Prayag Garg, Avdhesh Kumar, Yamini Krishna and Kanu Kumar Varshney 2014"A Review on Fabrication and Characterization of Hybrid Metal Matrix Composites," International Journal ofAdvance Research and Innovation, ISSN: 2347-3258, Vol. 1, 242-246.

IInternational Journal of Scientific Research in Computer Science, Engineering and Information Technology

Downloads

Published

2017-12-31

Issue

Volume 2, Issue 6, November-December-2017

Section

Research Articles

License

Copyright (c) IJSRCSEIT

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]
Poralla Venkatakrishna, Dumpa Suresh Reddy, Prashanth A, " Experimental and Computational Analysis of Piston Coated with Aluminium Silicon Metal Matrix Composite Material, IInternational Journal of Scientific Research in Computer Science, Engineering and Information Technology(IJSRCSEIT), ISSN : 2456-3307, Volume 2, Issue 6, pp.1018-1025, November-December-2017.